You need a xx-elo. The controller is also available in kits and enclosures with cabling and a power supply. After the self-test, the LED flashes once per second, indicating normal operation. If you have a touchmonitor, plug the DB9 female end of the supplied touchscreen cable into the DB9 male connector labeled “Touchscreen Interface” on the back of the touchmonitor case. Lenovo has found people buy its Qualcomm-powered always-connected PCs more for their long battery life than the fact they’re always connected. If you are not using an Elo touchmonitor, see the AccuTouch Product Manual for important information. This section assumes you are integrating the S serial controller board into your system as a component.

Uploader: Mazutaur
Date Added: 23 June 2011
File Size: 47.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 6241
Price: Free* [*Free Regsitration Required]

Unlike the serial cable, the touchscreen cable has a special construction. Is it due to the transition from xorg. Reversing polarity may damage the controller.

Follow these steps to install the E controller: All Elo AccuTouch touchmonitors have transient protection installed. Most Elo drivers require two-way communication and all four handshaking lines. Connect a power cable harness to P4 on the controller, a 2×5 eo with pins on 0. May 16th, 2.

Elo Original 351077-000 Touchscreen Controller

This must be converted to a DB9 male connector for connection with the DB9 female connector on the controller. The S controller operates on a single voltage, positive with respect to ground. The recommended mating plug is a Molex polarized, locking crimp terminal housing The controller is normally placed inside the display with the touchscreen cable connecting directly to the 2×6 header at P3 on the controller see Figure A chassis ground connection is required through one of the plated through mounting holes PTH or P4 pin 8 to provide adequate shielding for the touchscreen cable.


For details and our forum data attribution, retention and privacy policy, see here.

Elo touch systems Serial Controllers (IntelliTouch(R) 2500S 4.0

Choose an available expansion slot. Refer to the computer user’s manual for this step. Is the above code a good to go with xorg. Use an additional cable from the back of the display to your serial eli.

Connections Power Connections The E controller operates on a single voltage, positive with respect to ground.

Discharge any static charge on your body by touching the back of the computer cabinet. It is your responsibility to determine how best to mount the controller and output connector in the display or separate enclosure, and provide a power supply. The shell of this connector should be tied to chassis ground.

[SOLVED] intellitouch S setup

The controller is also available in kits and enclosures with cabling and a power supply. We break it down. For more information on transient protection, see the AccuTouch Product Manual. Insert the controller into the expansion slot.


Elo Original Touchscreen Controller | eBay

If you are installing the controller outside the display cabinet, you may need to make up a short cable with a connector that mates with the touchscreen connector, and a connector on the other end to suit the rlo. By this i mean going a search of the logs and the dmsg I see no reference to the touch screen.

Remember that the cable headers will increase the space required.

Don’t cut the cord on cable like a rookie The 3: If you do not have leo touchmonitor, see Connections. A multi-conductor cable terminated in a 2×6 female connector is attached to the IntelliTouch touchscreen.

See the AccuTouch Product Manual for various integration options. Phones by Jessica Dolcourt Dec 10, Be respectful, keep it civil and stay on topic. I’ve followed a number of forum postings on this matter and followed this URL advise with little luck using The serial port connection is at P2 on the controller, a 2×5 header with pins on 0.